XROS 5 Mini: Four lights flash 3 times and the device stops working
Written by Vape & E-Liquid Team Last updated
All four LED indicators flash together three times and the device cuts out. This is the built-in high-temperature protection activating to prevent damage.
Why this happens
- The device has exceeded its safe operating temperature, triggering the thermal cut-off
- Use in a hot environment, such as direct sunlight or a warm car, has raised the internal temperature above the safe threshold
- Prolonged continuous vaping sessions can build up heat inside the device
- Storage in conditions outside the recommended 10–40°C range before use
How to fix it
- Stop vaping immediately and set the device down on a flat surface away from direct sunlight or any heat source
- Allow it to cool down fully before attempting to use it again, the thermal protection will not clear until the temperature drops
- Check where you have been using or storing it: the recommended operating and storage temperature range is 10–40°C, so avoid leaving it in a hot car, on a sunny windowsill or near any heat source
- Once the device feels cool to the touch, try firing it again. If the three-flash pattern repeats immediately, move to a cooler environment and wait longer before retrying
- If the device continues to show the three-flash cut-off after cooling down fully in a normal indoor environment, contact Vaporesso support or the retailer, as the device should only be repaired by Vaporesso
Replacement pods and coils
Worn pods and coils cause most of these faults. We stock the parts that fit the XROS 5 Mini.
Other XROS 5 Mini problems
- All four lights stay on then go off after ten minutes whilst charging Whilst charging, all four LED indicator lights illuminate and stay on, then go out completely after roughly ten minutes. The device has triggered its built-in over-charging protection.
- Four lights flash 2 times and the device stops working All four LED indicators flash together twice and the device shuts off and refuses to fire. This is the low voltage or over-discharging warning, meaning the battery has dropped too low to operate safely.
- Four lights flash 4 times and the device stops working All four LED lights flash together 4 times and the device cuts out. This can happen mid-vape or when you try to fire the device.
- Four Lights Flash 5 Times and Device Stops Working All four LED lights flash together five times in quick succession and the XROS 5 Mini stops firing. This is the device's built-in protection responding to a low resistance or short-circuit reading at the pod connection.
- No lights come on and the device does nothing You press the button or draw on the device and nothing happens at all. No LEDs light up, no vibration, no vapour.
Related guides
What Wattage Should I Vape At? A Guide to Getting It Right
Wattage by coil resistance: what 0.2, 0.4, 0.6, 0.8 and 1.0 ohm coils want, pod vs tank coils, and why the printed range on your coil wins. Fix burnt or gurgling hits.
Read the guide
What Does Ohm Mean On A Vape? Resistance, Wattage & Coils Explained
What does ohm mean on a vape? Learn coil resistance, ideal wattage per ohm, sub-ohm vaping and MTL vs DTL, so you pick the right coil and e-liquid.
Read the guide