Lost Mary BM6000
A prefilled pod kit that bridges the gap between a disposable and a reusable device, the BM6000 suits MTL vapers who want long-lasting convenience without the faff of manually filling a tank.
Set up guide & tips
What you get in the box
Each BM6000 kit comes with a 2ml prefilled pod containing a 1.1 ohm QUAQ mesh coil, and a 10ml sealed refill container. The pod clips directly onto the refill container, and the whole assembly slots into the battery block. You do not fill the pod yourself; the container feeds e-liquid through a one-way valve as the pod depletes.
First-time setup
Step 1 - Connect the refill pack. Clip the 2ml prefilled pod onto the 10ml refill container until it clicks, then slide the combined assembly into the device body until it seats flush.
Step 2 - Prime the coil. Wait 30 to 60 seconds before your first puff. This lets the QUAQ mesh coil soak properly and prevents a dry, harsh first draw.
Step 3 - Draw and go. The BM6000 is draw-activated, so there are no buttons to press. Take a steady, relaxed MTL pull rather than a sharp drag.
Which e-liquid does the BM6000 use?
The BM6000 is a closed-loop system. It only works with the official Lost Mary BM6000 prefilled refill packs; you cannot use your own e-liquid. Each refill pack is factory-sealed, prefilled with MaryLiq nic salt e-liquid, and feeds into the pod automatically. Refill packs are available in 20mg/ml and 10mg/ml nicotine strengths, as well as 0mg, all fully TPD-compliant.
Battery and charging
The BM6000 has a 1000mAh built-in battery with a battery level display. Charge via USB-C; a full charge from empty takes approximately 30 to 45 minutes. The display blinks when battery drops below 20 percent, so you will get a clear warning before you run dry.
When to replace the refill pack
Once the 10ml container is empty, simply detach it and clip on a fresh refill pack. The 2ml pod continues to work until the mesh coil starts to degrade, which you will notice as a drop in flavour intensity or a faintly burnt undertone. At that point, replace both the pod and the container together using a new refill pack.
Specifications
| Specification | Value |
|---|---|
| Capacity | 2ml pod + 10ml refill container (12ml total per refill pack) |
| Battery Type | 1000mAh rechargeable, USB-C charging |
| Charging | Approximately 30 to 45 minutes from empty over USB-C |
| Resistance | 1.1 ohm (QUAQ mesh coil) |
Frequently asked questions
How does the Lost Mary BM6000 refill system work?
The BM6000 uses a one-way valve between the 10ml refill container and the 2ml pod. As you vape and the pod level drops, e-liquid feeds through automatically. You never manually top up the pod; just clip on a new refill pack when the container empties.
What are the best Lost Mary BM6000 flavours?
Popular picks from the range include Kiwi Passion Fruit Guava, Blueberry Sour Raspberry, Strawberry Kiwi, and Watermelon Ice. For something different, Cherry Peach Lemonade and Fizzy Cherry are worth trying. The range covers fruit, menthol, and a handful of bold blends such as Cherry Cola and Banana Volcano.
Can I use my own e-liquid in the BM6000?
No. The BM6000 is a closed system designed exclusively for official Lost Mary BM6000 refill packs. Attempting to open or modify the pod will damage it and cause leaking. Replacement refill packs are widely available and come in a large flavour selection.
How many puffs does the BM6000 give?
The BM6000 is rated at approximately 6,000 puffs per refill pack, which combines the 2ml pod and 10ml reservoir. Actual puff count varies depending on how long and frequently you draw, but it is substantially more than a standard single-use disposable.
What nicotine strengths are available for the BM6000?
Refill packs are available in 20mg/ml (2%) and 10mg/ml (1%) nic salt strengths, plus a 0mg option in selected flavours. The 20mg/ml option is the most widely stocked and suits vapers who have switched from cigarettes. All strengths are TPD-compliant for the UK market.
Why does my BM6000 taste burnt?
A burnt taste almost always means the mesh coil has not had enough time to soak. After fitting a new refill pack, wait the full 30 to 60 seconds before your first draw. Avoid chain-vaping, as rapid consecutive puffs can outpace the auto-refill valve. If the burnt taste persists after priming correctly, the coil is likely spent and the refill pack needs replacing.