Geek Bar Hagimi Pro Max 10K
A rechargeable prefilled pod kit built for MTL vapers who want long-lasting, fuss-free vaping, using an auto-refilling 2ml pod and 10ml container system for up to 10,000 puffs per set.
Set up guide & tips
The Hagimi Pro Max 10K works differently from a standard refillable pod kit, so it is worth understanding the system before you start.
How the refill system works
Each starter kit includes a 2ml prefilled pod and a 10ml refill container. These two parts click together to form a single unit, which then slots into the 850mAh battery. Once assembled, you do not manually top up the pod. The refill container feeds e-liquid directly into the 2ml pod automatically as you vape, effectively giving you 12ml of nic salt liquid per set.
When both the pod and the container run dry, the whole unit is removed and replaced with a fresh Geek Bar Hagimi Pro Max refill pack. The coil is built into the pod, so it is replaced automatically every time you swap in a new pack.
Step-by-step first use
- Remove the device and refill pack from the box.
- Insert the prefilled pod into the base of the refill container until it clicks securely.
- Slide the assembled pod-and-container unit into the battery.
- Check the LED display near the base of the device to confirm battery level.
- Give it a minute or two after assembly before your first puff, just to let the liquid settle into the coil.
- Draw steadily on the mouthpiece. The device is inhale-activated, so there are no buttons to press.
Before you vape
There is no manual priming step required here. The 0.8 ohm dual mesh coil comes pre-saturated inside the prefilled pod, and the auto-refill system keeps liquid flowing to the coil throughout the life of the pack. That said, a short wait after assembly helps ensure the coil is fully wetted, which reduces the chance of a dry hit on that very first puff.
Which e-liquid to use
The Hagimi Pro Max 10K uses dedicated Geek Bar Hagimi Pro Max refill packs only. These come prefilled with 20mg nic salt e-liquid, which is the maximum nicotine strength permitted under UK TPD regulations. Nic salts at this strength are well suited to MTL vaping, delivering a smooth throat hit and satisfying nicotine absorption without harshness. You cannot use third-party e-liquid with this system. When your current pack runs out, simply pick up a new Hagimi Pro Max refill pack in any of the available flavours.
Charging
Charge via USB-C. A cable is not included in the box, so you will need your own. Keep an eye on the LED display, which shows remaining battery status. The 850mAh battery is generous for this type of device and should comfortably last a full day of typical use between charges.
Specifications
| Specification | Value |
|---|---|
| Size | TBC |
| Capacity | 2ml prefilled pod + 10ml refill container (12ml per set) |
| Output Power | TBC |
| Output Voltage | TBC |
| Battery Type | 850mAh rechargeable |
| Charging | USB-C |
| Resistance Range | 0.8 ohm |
Frequently asked questions
How many puffs does the Geek Bar Hagimi Pro Max 10K actually give you?
Up to 10,000 puffs per refill set, based on the total 12ml of e-liquid across the 2ml pod and 10ml container. Real-world count will vary depending on puff length and frequency, but it is a substantial amount for a device this size.
Do I need to refill the pod manually?
No. The refill container feeds liquid into the 2ml pod automatically as you vape. There is no top-fill, no side-fill, no measuring. When both parts run dry, pull the unit out and snap in a fresh Hagimi Pro Max refill pack.
Can I use any e-liquid or pod with the Hagimi Pro Max 10K battery?
No. The battery is designed specifically for Geek Bar Hagimi Pro Max refill packs. These are the only compatible pods and containers. Using third-party liquids or pods is not supported by the system.
When should I replace the refill pack?
Replace it when both the pod and refill container are empty. The most reliable sign is a noticeable drop in vapour production or flavour intensity. The LED display monitors battery level but does not indicate liquid level, so keep track of how long each pack typically lasts you.
Is the Hagimi Pro Max 10K TPD compliant?
Yes. Each refill pack contains 20mg nic salt e-liquid at 20mg/ml, which is the legal maximum under UK TPD rules. The 2ml pod capacity also meets UK regulations. It is sold as a compliant rechargeable kit, not a disposable.
What is VPU technology and does it make a difference?
VPU refers to Geek Bar's coil technology used in the 0.8 ohm dual mesh coil, which incorporates precision ceramic cores and dual mesh heating. In practice, this means more consistent flavour across the life of the pack and a reduced risk of dry hits, particularly useful given that the coil is not user-replaceable.