IVG Nexio 10K
A rechargeable prefilled pod kit built for straightforward all-day vaping, suited to adult smokers switching from disposables and anyone who wants pods without the faff of bottled e-liquid.
Buy this device
IVG Nexio 10K
Shop these too
Consumables and accessories that fit the IVG Nexio 10K.
Set up guide & tips
The Nexio 10K uses a two-part pod system that handles its own refilling, so there is no bottled e-liquid involved and no coil to swap out. The setup takes about thirty seconds.
Assembling the Pod Set
- Remove all silicone caps and rubber seals from both the 2ml prefilled pod and the 8ml refill container. These are red or coloured pieces on the connectors, check both ends before clicking anything together.
- Click the 2ml pod and the 8ml refill container together firmly until they seat. You should feel a positive click.
- Slide the assembled pod unit into the Nexio battery device. Again, push it home until it seats properly.
- That is the setup done. The Nexio is draw-activated, so there are no buttons to press and no settings to adjust.
Before Your First Puff
The auto-refill system feeds liquid from the 8ml container into the 2ml pod chamber as you vape, so the coil should be pre-wetted from the factory. Even so, giving it a minute or two after assembly before your first draw is a sensible habit. It lets the liquid settle and reduces the chance of a dry first hit.
Charging
The Nexio charges via USB-C, though the cable is not included in the box, so have one ready before you start. Charge the device before first use if the battery indicator shows anything other than full. The digital display shows battery level in real time, so you can keep an eye on it throughout the day.
E-Liquid and Nicotine
Because the Nexio uses sealed prefilled pods, you are not choosing or adding your own e-liquid. Each pod set is filled with 20mg nicotine salt at the factory, which is the maximum permitted under UK TPD regulations. Nicotine salts at this strength are well-matched to an MTL draw, delivering a smooth but satisfying hit without harshness. If you are coming from cigarettes or a disposable vape, 20mg is the right place to start.
Replacing the Pod
When both the 2ml pod and the 8ml container are empty, remove the combined unit from the device and replace it with a new IVG Nexio refill pod set. The battery device is reusable. Keep the Nexio charged and simply cycle through replacement pod sets.
Specifications
| Specification | Value |
|---|---|
| Capacity | 2ml prefilled pod + 8ml auto-refill container (10ml total per set) |
| Battery Type | 1000mAh rechargeable |
| Charging | USB-C (cable NOT included) |
Frequently asked questions
What is the IVG Nexio 10K and how does it work?
The IVG Nexio 10K is a rechargeable prefilled pod kit. Each pod set combines a 2ml active pod with an 8ml refill container, totalling 10ml of e-liquid. The refill container feeds liquid into the pod automatically as you vape, so there is nothing to top up manually. Up to 10,000 puffs per pod set, usage dependent.
How do I set up the IVG Nexio 10K for the first time?
Remove all seals from both the pod and the refill container, click the two together, then slide the assembled unit into the battery. The device is draw-activated, so there are no buttons or settings. Charge via USB-C before first use and allow a minute for the liquid to settle before inhaling.
Does the IVG Nexio 10K need to be manually refilled?
No. The auto-refill system transfers e-liquid from the sealed 8ml container into the 2ml pod chamber automatically while you vape. You do not need bottled e-liquid or any manual topping up. When both sections are empty, you swap the whole pod unit for a new one and continue using the same battery device.
What nicotine strength does the IVG Nexio 10K use?
Every IVG Nexio pod set uses 20mg nicotine salt e-liquid, which is the maximum allowed under UK TPD rules. Nicotine salts at this level are a good match for the MTL airflow the Nexio delivers, giving a smooth throat hit with fast satisfaction, making it a practical choice for people switching from cigarettes or disposable vapes.
How long does the IVG Nexio 10K battery last and how do I charge it?
The Nexio runs on a 1000mAh built-in battery, which is a solid capacity for a pod kit at this size. The digital display shows battery level at a glance. Charge using any USB-C cable (not supplied). Recharge the device whenever needed; the battery is independent of the pod so you replace each separately.
What screen does the IVG Nexio 10K have?
The Nexio has a built-in digital LED display that shows battery level and puff count simultaneously. It activates on inhale, so you can check both readings during normal use without pressing anything. This is a step up from the single-LED indicators found on many pod kits and makes it easy to track when to recharge or swap the pod.