Digi Pro
A 2000mAh pod kit covering MTL and RDTL styles, the Digi Pro suits switchers and experienced vapers alike, running up to 40W with a touchscreen and interchangeable J coils.
Set up guide & tips
Inserting the Pod
The Digi Pro ships with two J Pods already included, a 0.6 ohm and a 0.4 ohm. Press the pod firmly into the top of the device until it clicks into place. The kit also supports JR Pod cartridges, which accept replaceable J coils rather than being single-use pods, so keep that in mind when you are reordering consumables.
Filling Your Pod
Both the J Pod and JR Pod cartridge fill from the top. Slide or lift the fill port cover, angle the tip of your e-liquid bottle into the port and fill slowly to avoid trapping air bubbles. The 2ml capacity is the UK TPD maximum. Top airflow sits above the e-liquid line by design, and a liquid diversion plate combined with silicone seals does a solid job of keeping things dry.
Priming the Coil
After filling, leave the pod to stand for five minutes before firing. This lets the e-liquid fully saturate the mesh coil and avoids a dry, burnt hit on the first draw. If you are fitting a fresh J coil into a JR cartridge, the same five-minute wait applies.
Choosing the Right E-Liquid
Coil resistance determines which e-liquid works best here:
- 0.6 ohm J Pod - this is an MTL coil. Use a 50/50 or similar balanced VG/PG blend. Nicotine salts at 10mg or 20mg work very well at these wattages if you want a smooth, satisfying hit.
- 0.4 ohm J Pod - this edges into RDTL territory and handles more vapour. A 70/30 VG/PG shortfill or similar higher-VG blend suits it. If you are using nic salts here, stick to 10mg; the output at this resistance is noticeably higher.
Power Modes and Airflow
The Digi Pro gives you three modes. Smart Mode reads the coil and sets a recommended wattage automatically, which is the easiest starting point. Boost Mode increases output for more flavour and cloud. Eco Mode dials things back to extend battery life. The airflow slider on the pod adjusts draw resistance from a tighter MTL feel through to a more open RDTL inhale. Start tighter and open it gradually until it suits you. The lock switch on the base is worth using if the device is going in a pocket or bag, it prevents accidental firing and menu changes.
Charging
Charge via the USB-C port on the base at 5V/2A. Geekvape state a full charge takes around 30 minutes, which is genuinely quick for a 2000mAh battery. Do not leave it charging unattended overnight as a general best practice.
Specifications
| Specification | Value |
|---|---|
| Capacity | 2ml (TPD) |
| Output Power | 5-40W adjustable |
| Battery Type | 2000mAh built-in |
| Charging | USB-C 5V/2A, 30 min full charge |
| Resistance Range | 0.4, 0.6, 0.8, 1.2 ohm (J coils) |
Frequently asked questions
What pods and coils are compatible with the Geekvape Digi Pro?
The Digi Pro is compatible with Geekvape J Pods (disposable pods with built-in coils) and JR Pod cartridges (reusable shells that accept replaceable J coils). J coils are available in 0.4, 0.6, 0.8 and 1.2 ohm resistances, covering MTL through to RDTL vaping styles.
What is the difference between the Geekvape Digi Pro and the Digi Max?
The Digi Max is a larger device with a bigger screen and higher maximum output. The Digi Pro is the more compact option, built around the same J coil ecosystem but in a smaller, lighter form factor. If pocketability matters most, the Digi Pro is the better pick.
What colours does the Geekvape Digi Pro come in?
Colour options are TBC on this page. The kit has been available in at least a Black finish. Check the product listing for the current colour range in stock.
How long does the Geekvape Digi Pro battery last?
The built-in 2000mAh battery should see most vapers through a full day of moderate use. Eco Mode helps stretch battery life if you are running low. When it does need charging, the USB-C port at 5V/2A brings it back to full in around 30 minutes.
Which e-liquid should I use in the Geekvape Digi Pro?
Match your e-liquid to the coil. The 0.6 ohm pod suits 50/50 blends and nic salts up to 20mg. The 0.4 ohm pod handles 70/30 higher-VG e-liquids better. Avoid thick 80/20 or 100VG shortfills in the 0.6 ohm pod as the coil will not wick fast enough and you risk dry hits.
Can I use the Geekvape Digi Pro as a mouth-to-lung device?
Yes. The 0.6 ohm J Pod paired with the airflow slider on its tighter setting gives a genuine MTL draw. Drop the wattage into the lower end of the range or use Eco Mode and it feels close to a cigarette-style pull, making it a reasonable choice for someone newly switched from smoking.