Vibe SE 2: Pod leaking e-liquid
Written by Vape & E-Liquid Team Last updated
E-liquid is escaping from the pod, either around the fill port or from the base where it connects to the battery. This can happen during normal use, after filling, or when travelling.
Why this happens
- Silicone fill plug not pushed back in firmly after refilling, leaving the fill hole exposed
- Pod overfilled, leaving no air space and forcing liquid out under pressure
- Air pressure changes (such as flying or high-altitude travel) causing liquid to expand and escape
How to fix it
- Remove the pod from the battery and check the silicone plug on the side of the pod. Press it back in firmly until it sits flush and fully seals the fill hole.
- When refilling, do not fill the pod completely to the top. Leave a small air gap to prevent pressure build-up forcing liquid out.
- If you are travelling by air or in environments with significant air pressure changes, store the pod and battery separately and avoid filling the pod until you are back at normal pressure.
Other Vibe SE 2 problems
- Battery-colour light flashes 5 times and device stops working The battery-level indicator light flashes 5 times and the device cuts out immediately when you try to fire it. This is the device reporting a no-load or high-resistance condition at the pod contacts.
- Device stops working and LED cycles green–blue–red The device cuts out mid-puff and the LED flashes green, blue then red in sequence. This happens when a draw or button press has lasted 8 seconds or longer.
- Green light stays on and device stops charging The green LED stays on and the device stops taking a charge. This is the over-charge protection cutting in, not a fault.
- Red light flashes 3 times and device stops working The red indicator flashes 3 times and the device cuts out completely. This is the built-in low voltage or over-discharging protection triggering to prevent battery damage.
- Red light flashes 4 times and device stops working The red indicator light flashes 4 times and the device cuts out and stops producing vapour. This is the built-in high-temperature protection activating.
Related guides
What Wattage Should I Vape At? A Guide to Getting It Right
Wattage by coil resistance: what 0.2, 0.4, 0.6, 0.8 and 1.0 ohm coils want, pod vs tank coils, and why the printed range on your coil wins. Fix burnt or gurgling hits.
Read the guide
What Does Ohm Mean On A Vape? Resistance, Wattage & Coils Explained
What does ohm mean on a vape? Learn coil resistance, ideal wattage per ohm, sub-ohm vaping and MTL vs DTL, so you pick the right coil and e-liquid.
Read the guide