Vibe SE 2: Battery-colour light flashes 5 times and device stops working
Written by Vape & E-Liquid Team Last updated
The battery-level indicator light flashes 5 times and the device cuts out immediately when you try to fire it. This is the device reporting a no-load or high-resistance condition at the pod contacts.
Why this happens
- Poor or dirty contact between the pod base and the battery section contacts, preventing the device from reading the coil correctly
- High coil resistance detected, which triggers the built-in protection cut-off
- A faulty or damaged pod that the device cannot recognise
How to fix it
- Remove the pod from the battery section completely.
- Wipe the metal contacts on the base of the pod and the contacts inside the battery section with a dry cloth to remove any e-liquid residue or debris.
- Reseat the pod firmly until you feel and hear it click into place, then try firing again.
- If the 5-flash cut-off continues, try a replacement pod, as the original pod or its coil may be faulty.
Other Vibe SE 2 problems
- Device stops working and LED cycles green–blue–red The device cuts out mid-puff and the LED flashes green, blue then red in sequence. This happens when a draw or button press has lasted 8 seconds or longer.
- Green light stays on and device stops charging The green LED stays on and the device stops taking a charge. This is the over-charge protection cutting in, not a fault.
- Pod leaking e-liquid E-liquid is escaping from the pod, either around the fill port or from the base where it connects to the battery. This can happen during normal use, after filling, or when travelling.
- Red light flashes 3 times and device stops working The red indicator flashes 3 times and the device cuts out completely. This is the built-in low voltage or over-discharging protection triggering to prevent battery damage.
- Red light flashes 4 times and device stops working The red indicator light flashes 4 times and the device cuts out and stops producing vapour. This is the built-in high-temperature protection activating.
Related guides
What Wattage Should I Vape At? A Guide to Getting It Right
Wattage by coil resistance: what 0.2, 0.4, 0.6, 0.8 and 1.0 ohm coils want, pod vs tank coils, and why the printed range on your coil wins. Fix burnt or gurgling hits.
Read the guide
What Does Ohm Mean On A Vape? Resistance, Wattage & Coils Explained
What does ohm mean on a vape? Learn coil resistance, ideal wattage per ohm, sub-ohm vaping and MTL vs DTL, so you pick the right coil and e-liquid.
Read the guide