Argus P3: Fire button not responding
Written by Vape & E-Liquid Team Last updated
You press the fire button and nothing happens. The device does not produce vapour and shows no sign of responding to the button press.
Why this happens
- Device is locked, preventing the fire button from working
- Button not being pressed firmly enough to register
- A temporary firmware or software glitch requiring a restart
How to fix it
- Check whether the device is locked. Unlock it using the button sequence for your device before trying to fire again.
- Press the fire button more firmly and deliberately. A light or partial press may not register.
- Restart the device by switching it off and back on, then press the fire button again to test.
Replacement pods and coils
Worn pods and coils cause most of these faults. We stock the parts that fit the Argus P3.
Other Argus P3 problems
- Check atomiser warning or pod not recognised The device displays a 'Check Atomiser' warning or fails to recognise the pod when you insert it. It will not fire until the issue is resolved.
- Gurgling, spitting or flooded pod The pod makes a gurgling noise when you vape, spits hot liquid into your mouth, or feels flooded and produces little vapour. This usually means excess e-liquid has pooled in the coil or airpath.
- Low power, auto shut-off or battery warning The device cuts out unexpectedly, shows a battery warning, or delivers noticeably less power than expected, even when the battery is not fully depleted.
Related guides
What Wattage Should I Vape At? A Guide to Getting It Right
Wattage by coil resistance: what 0.2, 0.4, 0.6, 0.8 and 1.0 ohm coils want, pod vs tank coils, and why the printed range on your coil wins. Fix burnt or gurgling hits.
Read the guide
What Does Ohm Mean On A Vape? Resistance, Wattage & Coils Explained
What does ohm mean on a vape? Learn coil resistance, ideal wattage per ohm, sub-ohm vaping and MTL vs DTL, so you pick the right coil and e-liquid.
Read the guide