Vinci Spark 220: Screen shows 'Max Power'
Written by Vape & E-Liquid Team Last updated
The screen displays 'Max Power' while you are vaping or adjusting settings. This means the device has hit the top of its power output limit and cannot go any higher.
Why this happens
- The wattage has been set at or above the device's maximum power output limit
- The installed coil has a recommended wattage range that sits below the current power setting, pushing the device to its ceiling
- The wattage was increased beyond what the coil requires, triggering the Max Power indicator
How to fix it
- Press the adjustment button to reduce the wattage setting until the 'Max Power' message disappears from the screen
- Check the recommended wattage range printed on the side of your coil, then set the wattage within that range rather than at the top of it
- If you are unsure of the coil's recommended range, start at the lower end of the range shown on the coil and work upward in small steps until you find a comfortable vape, staying below the maximum power limit
Other Vinci Spark 220 problems
Related guides
What Wattage Should I Vape At? A Guide to Getting It Right
Wattage by coil resistance: what 0.2, 0.4, 0.6, 0.8 and 1.0 ohm coils want, pod vs tank coils, and why the printed range on your coil wins. Fix burnt or gurgling hits.
Read the guide
What Does Ohm Mean On A Vape? Resistance, Wattage & Coils Explained
What does ohm mean on a vape? Learn coil resistance, ideal wattage per ohm, sub-ohm vaping and MTL vs DTL, so you pick the right coil and e-liquid.
Read the guide