Al Fakher Hypermax Prime 50K: Battery draining too fast or dying within a day
Written by Vape & E-Liquid Team Last updated
The device runs out of charge much faster than expected, sometimes dying within a single day of normal use. This mirrors a recurring complaint from owners of the predecessor model.
Why this happens
- Running the device in Boost mode continuously, which draws significantly more power than Eco mode
- Starting use without a full initial charge, meaning the battery never reaches its full 1000mAh capacity from the outset
- Heavy, frequent puffing sessions that place sustained demand on the battery
- A battery that has degraded over time or was supplied in a partially discharged state
How to fix it
- Charge the device fully via USB-C before first use and before each day of use, ensuring the charge cycle completes rather than topping up briefly
- Switch from Boost mode to Eco mode, as Eco mode is specifically designed to extend battery life between charges
- If you regularly use Boost mode, consider keeping a charging cable nearby or carrying a power bank, as higher output modes will always reduce runtime on a 1000mAh cell
- If the battery drains unusually fast even in Eco mode after a full charge, the unit may have a fault. Contact the retailer or Al Fakher support for a replacement assessment
Replacement pods and coils
Worn pods and coils cause most of these faults. We stock the parts that fit the Al Fakher Hypermax Prime 50K.
Other Al Fakher Hypermax Prime 50K problems
Related guides
What Wattage Should I Vape At? A Guide to Getting It Right
Wattage by coil resistance: what 0.2, 0.4, 0.6, 0.8 and 1.0 ohm coils want, pod vs tank coils, and why the printed range on your coil wins. Fix burnt or gurgling hits.
Read the guide
What Does Ohm Mean On A Vape? Resistance, Wattage & Coils Explained
What does ohm mean on a vape? Learn coil resistance, ideal wattage per ohm, sub-ohm vaping and MTL vs DTL, so you pick the right coil and e-liquid.
Read the guide