best-seller
OXVA NeXlim Vape Kits & Pods
The Oxva NeXlim range brings refillable MTL/RDL pod vape kits built around one shared pod system, covering three kit sizes plus replacement pods. Whether you want a compact everyday kit, a bigger battery for longer between charges, or adjustable wattage to set your own draw, there's a NeXlim built for it. Buy genuine Oxva stock here and keep your kit topped up with the matching replacement pods.
5 products
OXVA NeXlim vape kits and pods
The OXVA NeXlim is a family of four refillable pod kits that all take the same NeXlim pods. The kits run from the auto-draw NeXlim Go to the 2000mAh NeXlim 2, and the replacement pods for every one of them are on this page.
What is the OXVA NeXlim?
A refillable pod kit with a dual mesh coil sealed inside each 2ml pod. You fill the pod with your own e-liquid, and when the flavour fades you fit a fresh pod rather than a separate coil. The draw runs from a tight mouth to lung (MTL) pull to a looser restricted direct lung (RDL) one, depending on the airflow setting and the pod resistance.
It is a smaller range than OXVA's Xlim, but that keeps the choice simple: any NeXlim pod fits any NeXlim kit, so the kit you pick never limits the pods you can buy. All four run Boost and Eco modes, a stronger setting and a gentler one that stretches the battery.
The four kits
The differences come down to battery, screen and how much say you get over the power.
| Spec | NeXlim 2 | NeXlim 2 Mini | NeXlim | NeXlim Go |
|---|---|---|---|---|
| Battery | 2000mAh | 1500mAh | 1500mAh | 1800mAh |
| Power | 5 to 40W | 5 to 30W | 5 to 40W | Set by the pod |
| Display | Colour screen | LED light | Colour screen | LED light |
| Pod generation | UniTech 3.0 | UniTech 3.0 | UniTech 2.0 | UniTech 2.0 |
The NeXlim Go and NeXlim 2 Mini fire on the draw, with nothing to press. The NeXlim and NeXlim 2 have a fire button and a 0.85 inch colour screen, and the original NeXlim fires on the draw as well.
NeXlim pods
Replacement pods come in packs of three, in 0.6, 0.8 and 1.2ohm, across two coil generations: UniTech 2.0 and the newer UniTech 3.0. Both generations fit all four kits. UK pods hold 2ml, and the buying guide below covers which generation and resistance to pick.
How to choose your OXVA NeXlim
At a glance
- Every NeXlim pod fits every NeXlim kit, UniTech 2.0 or 3.0
- UK pods hold 2ml and come in 0.6, 0.8 and 1.2ohm, in packs of three
- 0.8 and 1.2ohm suit nic salts and a tighter mouth to lung draw
- The NeXlim 2 has the biggest battery in the range at 2000mAh
- The NeXlim Go has no screen and no settings, and fires on the draw
1. Choose the kit
With one pod across the range, the kit is the only choice that is hard to undo later. Match it to how much you vape and how much you want to adjust.
- Take the NeXlim 2 if you vape through the day and want the longest time between charges. It comes with a 0.6ohm and a 0.8ohm UniTech 3.0 pod, so you can try both draws before buying spares.
- Take the NeXlim 2 Mini if you want the UniTech 3.0 pods in a slimmer aluminium body. OXVA quotes up to seven days on Eco mode; a heavier vaper will see a good deal less.
- Take the NeXlim if you want the screen and 40W ceiling of the NeXlim 2 and can live with a 1500mAh battery. Its UniTech 2.0 pods fit the newer kits, so nothing is wasted if you upgrade.
- Take the NeXlim Go if you want nothing to set up. It reads the pod, sets its own power and fires on the draw, and a side switch handles Eco and Boost.
2. Choose the pod generation
Both generations hold 2ml, come in packs of three and cover the same three resistances. The real difference is the seal.
| UniTech 2.0 pods | UniTech 3.0 pods | |
|---|---|---|
| Fits | NeXlim, Go, 2 and 2 Mini | NeXlim, Go, 2 and 2 Mini |
| Capacity | 2ml | 2ml |
| Resistances | 0.6, 0.8 and 1.2ohm | 0.6, 0.8 and 1.2ohm |
| Coil | Dual mesh, sealed in | Dual mesh, sealed in |
| Leak sealing | Standard | Triple anti-leak seal |
| Ships with | NeXlim and NeXlim Go | NeXlim 2 and 2 Mini |
If a 2.0 pod has leaked on you, try the 3.0; otherwise stay with whichever you are used to. Both fit every kit, so the only wrong pod for a NeXlim is an Xlim one.
3. Choose the resistance and e-liquid
The pod resistance sets the draw, and the draw sets the e-liquid, so pick the two together.
- 1.2ohm: the tightest, coolest mouth to lung draw, suited to a 50/50 nic salt.
- 0.8ohm: still mouth to lung but a little airier, and happy with a nic salt or a 50/50 freebase.
- 0.6ohm: a looser, warmer draw with more vapour, better with a 50/50 or 70/30 freebase than a strong salt.
Nothing thicker than 70/30 belongs in these pods. A high VG liquid wicks too slowly through a pod coil and tastes burnt, even on a fresh pod.
Before you buy
- Decide between a screen with wattage control and a kit that sets itself
- Pick a resistance: 0.8 or 1.2ohm for nic salts, 0.6ohm for a looser draw
- Check your e-liquid is 50/50, or no thicker than 70/30 on the 0.6ohm pod
- Add a spare pack of pods so a worn coil does not leave you stuck
Related categories
NeXLIM FAQs
Is the OXVA NeXlim worth buying?
Yes, for most people moving to a refillable pod kit. Every kit takes the same 2ml pods, and those pods are widely stocked in the UK. The range runs from an auto-draw kit with no settings to a 2000mAh kit with a colour screen. The trade-off is that the coil is sealed inside the pod, so you replace the whole pod when it wears out rather than a cheaper standalone coil.
Is the NeXlim better than the Xlim?
Neither is better outright: they are separate OXVA ranges, and NeXlim pods do not fit Xlim kits or the other way round. The NeXlim and NeXlim 2 run up to 40W against 30W on the Xlim Pro 3, while the Xlim is the larger and longer running range. Choose the family whose kits suit you, then stay with its pods. The OXVA Xlim range is here if you want to compare.
Do NeXlim 2 pods fit the original NeXlim?
Yes. The UniTech 3.0 pods that come with the NeXlim 2 fit the original NeXlim and the NeXlim Go, and the older UniTech 2.0 pods fit the NeXlim 2 and NeXlim 2 Mini. Every NeXlim pod works in all four kits, whichever resistance you choose. Our NeXlim replacement pods come in both generations.
Can you get 4ml NeXlim pods in the UK?
No. UK law caps refillable pods and tanks at 2ml, so NeXlim pods sold legally in the UK hold 2ml. The 4ml versions are made for markets outside the UK. If you get through a pod quickly, keeping a second filled pod with you does the same job.
Are OXVA NeXlim pods prefilled?
No. NeXlim pods are refillable: you fill them with your own e-liquid and replace the pod once the coil wears out. Every NeXlim pod we sell comes empty, in packs of three, in 0.6, 0.8 or 1.2ohm.
How long do OXVA NeXlim pods last?
OXVA rates the UniTech 3.0 pod at up to 30 refills, but flavour is a better guide than a count. When the taste turns flat or faintly burnt, the coil is done and it is time for a fresh pod. Sweet liquids and higher power wear a coil out faster, so the same pod lasts longer on a plain fruit or menthol at a lower setting.
Is 0.8 or 0.6 better on an OXVA NeXlim?
0.8ohm for a nic salt and a tighter mouth to lung draw, 0.6ohm for a looser, warmer draw on a 50/50 or 70/30 freebase. If you are coming from a prefilled vape, the 0.8 or 1.2ohm will feel closest to what you are used to. The NeXlim 2 ships with a 0.6 and a 0.8ohm pod, so you can try both before buying spares.
Can I use shortfills in an OXVA NeXlim?
How long does the OXVA NeXlim battery last?
A full day for most people on any of the four kits, and longer on Eco mode. The NeXlim 2 has the largest battery at 2000mAh, the NeXlim Go carries 1800mAh, and the NeXlim and NeXlim 2 Mini carry 1500mAh. Boost mode drains it faster, and so does running a 0.6ohm pod at higher power.
How do I use the OXVA NeXlim?
Fill the pod, leave it five to eight minutes so the coil soaks through, then click it into the kit and draw. The NeXlim Go and NeXlim 2 Mini fire on the draw, while the NeXlim and NeXlim 2 have a fire button. Use Eco for everyday vaping and Boost when you want a stronger hit.
18+ For adults only. Nicotine is an addictive substance. We check age at checkout.