VOOPOO TPP Coils

VOOPOO TPP Coils

These are mesh replacement coils made for VOOPOO's TPP (Tank Pod Platform) pod tanks. They sit in the same family as the PnP coil range, but they are a separate fitting, so check your tank before you order. Each pack holds 3 coils of the model you pick.

VOOPOO built them around its patented coil technology, which gives a larger atomising area and quicker heat-up. Four models are available, covering direct lung and half direct lung vaping. They press into the base with no tools, so a swap takes a minute or two.

Which kits it fits

These coils fit three tanks only:

• TPP Pod Tank
• TPP-X Pod Tank
• TPP Pod Tank 2

That covers a good run of VOOPOO kits, as long as the right tank is on the device:

• Drag 3 kit
• Drag X Plus and Drag X Plus Pro, through a TPP pod tank
• Drag X Pro, with the TPP-X Pod Tank
• Argus XT and Argus MT, Maat Edition only

They do not fit PnP pods or PnP tanks. If your tank takes PnP coils, these will not seat.

Choosing your resistance

Resistance sets how the draw feels. A higher resistance gives a tighter, cooler draw, closer to mouth-to-lung. A lower resistance gives a warmer, airier draw and more vapour, and suits higher VG e-liquid.

• TPP-DM1 (0.15 ohm): direct lung, for a warm, open draw at 60-80W.
• TPP-DM3 (0.15 ohm): direct lung too, but built for more power, at 80-100W.
• TPP-DM2 (0.2 ohm): direct lung with a slightly more reined-in feel, at 40-60W.
• TPP-DM4 (0.3 ohm): half direct lung, the tightest and coolest of the four, at 32-40W.

Whichever you choose, the maker suggests e-liquid of about 70% VG or more, with nicotine at 10mg or less. If you like a tighter draw with a nic salt, DM4 is the natural pick. Once the coil is pressed in, fill the tank and give it a few minutes to soak before your first pull.

Specification	Detail
Brand	VOOPOO
Model	TPP Coils
Resistance / power: TPP-DM1	0.15 ohm, 60-80W, direct lung
Resistance / power: TPP-DM2	0.2 ohm, 40-60W, direct lung
Resistance / power: TPP-DM3	0.15 ohm, 80-100W, direct lung
Resistance / power: TPP-DM4	0.3 ohm, 32-40W, half direct lung
Coil type	Mesh
Installation	Press-fit
Recommended e-liquid	High VG (about 70% or more), nicotine 10mg or less
Compatible with	TPP Pod Tank, TPP-X Pod Tank, TPP Pod Tank 2; not PnP pods or tanks
Resistance options	TPP-DM1 (0.15 ohm Mesh), TPP-DM3 (0.15 ohm Mesh), TPP-DM2 (0.2 ohm Mesh), TPP-DM4 (0.3 ohm Mesh)

• 3 x VOOPOO TPP coils of your chosen model per pack