VooPoo Vinci Spark 220 Sub-Ohm Vape Kit
- 5-220W adjustable output
- Smart, RBA and TC modes
- Dual 18650 power (sold separately)
- Dual airway direct-to-lung draw
Why you'll love it
- Full manual control up to 220W, or let Smart mode set the wattage for you
- Temperature control on Ni200, Titanium, SS316 and SS430 wire for consistent draws
- Bright 1.47 inch screen shows both battery levels at a glance
- Tool-free magnetic battery cover for fast swaps
- Lightweight aluminium alloy body that's easy to carry all day
- PnP X coil compatibility gives you options from tight RDL to open DTL
At a glance
- Replaceable pods
- Yes
- Brand
- VooPoo
- Model
- Vinci Spark 220
- Vaping style
- DTL / RDL
- Function
- Adjustable Wattage
- Power
- 2x 18650
- Device type
- Sub-Ohm Vape Kit
- Tank
- UForce-X Tank
- Colour options
- 7
Description
VooPoo Vinci Spark 220 Sub-Ohm Vape Kit
The Vinci Spark 220 is VooPoo's flagship sub-ohm kit, built around the GENE.AI 2.0 chipset and a dual 18650 setup (batteries sold separately) that runs from 5W right up to 220W. Fire it with a single press and dial in your wattage through the sharp 1.47 inch TFT screen, or let Smart mode read the coil and set a sensible starting point for you.
Paired with the Uforce-X tank and PnP X coils, this is a proper direct-to-lung kit for anyone after big vapour and genuine flexibility without needing to fuss over rebuildables, though RBA mode hands you full manual control if you fancy it. It suits vapers stepping up from smaller pod kits or after a dependable daily mod with room to tinker.
What it does well
- Adjustable output from 5W to 220W across Smart, RBA and TC modes, so you can leave it on autopilot or take full manual control
- GENE.AI 2.0 chipset with temperature control on Ni200, Titanium, SS316 and SS430 wire, held between 100 and 315 degrees C
- 1.47 inch TFT screen with four times the resolution of a standard box mod display, showing wattage, resistance and each battery's charge level individually
- 84 embedded LED lights with animated firing and idle effects, switchable off through the menu if you'd rather save battery
- Aluminium alloy build that's 30% lighter than a typical dual-battery mod, with a magnetic cover for tool-free battery swaps
- Type-C charging at 5V/2A and seven built-in safety protections for everyday peace of mind
Pods, coils and e-liquid match
The kit ships with the 2ml Uforce-X tank, fitted with a dual airway system for even airflow and a slide-to-fill top cap that saves you unscrewing anything. It runs on the PnP X coil range from 0.15 ohm up to 1.0 ohm, and the box includes the 0.15 ohm and 0.3 ohm coils, both built for direct-to-lung vaping on high-VG e-liquids and shortfills. Coils press-fit into place with no threading, and each one is good for roughly 100ml before it needs swapping.
Specification
| Specification | Detail |
|---|---|
| Brand | VooPoo |
| Model | Vinci Spark 220 |
| Vaping style | DTL / RDL |
| Function | Adjustable Wattage |
| Power | 2x 18650 |
| Device type | Sub-Ohm Vape Kit |
| Tank | UForce-X Tank |
| Colour options | 7 |
What's in the box
- VooPoo Vinci Spark 220 mod
- Uforce-X tank (2ml)
- 0.15 ohm PnP X coil
- 0.3 ohm PnP X coil
- Spare glass tube
- Type-C USB cable
- Spare O-rings
- User manual
Delivery & returns
-
Free Next-Day Delivery
On orders over £35
-
7-day dispatch
Same-day processing before 4pm, every day
-
Discreet tracked delivery
Plain packaging, full tracking
-
Expert support team
No chatbots. Speak to an expert.
VooPoo Vinci Spark 220 Sub-Ohm Vape Kit FAQs
Does the VooPoo Vinci Spark 220 kit come with batteries?
No. The kit runs on two 18650 batteries, sold separately, which sit under the magnetic cover. You'll need to pick these up alongside the mod before you can fire it up.
What coils does the VooPoo Vinci Spark 220 use?
It takes PnP X coils, spanning 0.15 ohm to 1.0 ohm. The box includes the 0.15 ohm and 0.3 ohm coils, both suited to direct-to-lung vaping at higher wattages.
What's the difference between Smart, RBA and TC modes on the Vinci Spark 220?
Smart auto-detects your coil and sets a recommended wattage. RBA gives full manual control across the entire 5-220W range. TC holds a set temperature between 100 and 315 degrees C on Ni200, Titanium, SS316 or SS430 wire.
Can I use shortfills and high-VG e-liquid in this kit?
Yes. The included 0.15 ohm and 0.3 ohm PnP X coils are built for direct-to-lung vaping and suit high-VG e-liquids and shortfills at their recommended wattage ranges.
How long does each PnP X coil last?
Each coil is good for approximately 100ml of e-liquid before flavour and vapour production start to drop off, at which point it's a simple press-fit swap for a fresh one.
18+ For adults only. This product contains nicotine which is a highly addictive substance. We check age at checkout.