Order by 4pm for next-day delivery Free over £35
VooPoo Argus Snap Pod Cartridge, replacement pod fitting Argus P3, G3, G2, P2, Z2, A, Matrix, Klyc and SE kits
Voopoo

VooPoo Argus Snap Pod Cartridges

£10.49 incl. VAT
Resistance: 0.4ohm In stock
Quantity

Order by 4pm for next-day delivery

Spend £35 & get next-day delivery free

Genuine UK stock · Discreet packaging

  • Magnetic fit across the Argus range
  • Built-in leak protection
  • Snap-hinge cap, no loose plug
  • Three resistances, MTL to RDL

Why you'll love it

  • Hinged snap-fill cap opens and closes without a plug to misplace
  • Integrated mesh coil in every pod for a consistent draw
  • Three resistances covering tight MTL through to airier RDL vaping
  • Magnetic base fits straight onto any Argus kit
  • 2ml refillable capacity, TPD compliant
  • Liquid-seal shield built into every pod against leaks

At a glance

Replaceable pods
Yes
Brand
VooPoo
Model
Argus Snap
Vaping style
MTL / RDL
Pod capacity
2ml / XL
Pod style
Refillable
Pack size
3
Resistance options
0.4ohm, 0.7ohm, 1.0ohm
Description

VooPoo Argus Snap Pod Cartridges

This is the newer cartridge in the Argus family, built around a hinged black cap that snaps backwards to open the fill port. There's no silicone plug to tug out and drop on the counter, and no side-fill slot to line up. Each pod carries its own integrated mesh coil, so when the flavour starts to fade you swap the whole pod rather than hunting for a separate coil.

A pack gives you three pods of the same resistance, ready to fit straight onto your Argus kit's magnetic base. If your current pod is leaking, tasting burnt, or you just want a spare on hand before a night out, this is the part you need.

Which kits it fits

Argus Snap cartridges use the same magnetic connection found across the whole VooPoo Argus range, so one style of pod covers a lot of kits:

  • VooPoo Argus P3 (this is the only kit that ships with Snap pods as standard)
  • VooPoo Argus G3 and G3 Mini
  • VooPoo Argus G2 and G2 Mini
  • VooPoo Argus P2
  • VooPoo Argus Z2
  • VooPoo Argus A
  • VooPoo Argus Matrix
  • VooPoo Argus Klyc
  • VooPoo Argus SE

Every other kit on that list leaves the box with Top Fill V2 pods fitted, but the Snap cartridge drops straight onto the same connector, so you can switch over to the hinged fill cap whenever you like.

Choosing your resistance

All three resistances share the same coil build and top-fill design, so the choice comes down to how tight you want the draw and what you're vaping.

The 1.0Ω sits at the tighter end, giving a cooler, more restricted pull that suits nic salts, 50/50 mixes and higher PG liquids, closer to the feel of a cigarette draw. Step up to 0.7Ω and the draw opens out a little, landing in that in-between zone that works well for most 10mg and 20mg nic salts without feeling too airy or too closed off.

The 0.4Ω is the loosest and warmest of the three, built for direct lung style vaping and higher VG freebase or sub-ohm e-liquids where you want more vapour on each draw. If you're not sure where to start, 0.7Ω is the middle ground most people settle on before trying the other two.

Specification
Specification Detail
Brand VooPoo
Model Argus Snap
Vaping style MTL / RDL
Pod capacity 2ml / XL
Pod style Refillable
Pack size 3
Resistance options 0.4ohm, 0.7ohm, 1.0ohm
What's in the box
  • 3 x VooPoo Argus Snap Pod Cartridges (one resistance per pack: 0.4Ω, 0.7Ω or 1.0Ω)
Delivery & returns
  • Free Next-Day Delivery

    On orders over £35

  • 7-day dispatch

    Same-day processing before 4pm, every day

  • Discreet tracked delivery

    Plain packaging, full tracking

  • Expert support team

    No chatbots. Speak to an expert.

VooPoo Argus Snap Pod Cartridges FAQs

Which VooPoo kits do the Argus Snap cartridges fit?

They fit every kit in the Argus magnetic range: P3, G3, G3 Mini, G2, G2 Mini, P2, Z2, A, Matrix, Klyc and SE. The P3 is the only one that ships with Snap pods fitted as standard.

How do you fill the Argus Snap cartridge?

Snap the black cap back on its hinge to expose the fill port, add your e-liquid, then snap the cap forward to close it. Leave the pod to stand for around 10 minutes before vaping so the cotton can soak through fully.

What's different about the Snap pod compared to other Argus cartridges?

The Snap uses a hinged top-fill cap instead of the flip-open or slide plug found on older Argus pods, so there's nothing loose to lose. The coil, magnetic connection and capacity are otherwise the same.

Which resistance should I pick, 0.4Ω, 0.7Ω or 1.0Ω?

Go for 1.0Ω for a tight, cigarette-like MTL draw, 0.7Ω for a balanced middle ground that suits most nic salts, or 0.4Ω for a warmer, airier pull with higher VG freebase liquids.

How long does one Argus Snap pod last?

Each pod's coil is built to run through roughly 100ml of e-liquid before flavour starts to drop off, at which point you swap in a fresh pod from the pack.

18+ For adults only. This product contains nicotine which is a highly addictive substance. We check age at checkout.