Hellvape
Hellvape P-Series Replacement Coils
£7.99 incl. VAT
- Fits Fat Rabbit 2 and Hellbeast 2 tanks
- Push-in fitting, no tools
- Two resistances: 0.15ohm or 0.2ohm
- Kanthal (KA1) mesh coil
Why you'll love it
- Made for the Hellvape Fat Rabbit 2 and Hellbeast 2 tanks
- Push-in fitting, so no wrapping, cotton or tools
- P7-01 0.15ohm for a warmer, airier draw at 60-70W
- P7-02 0.2ohm for a slightly cooler draw at 50-60W
- Kanthal (KA1) mesh build for direct lung vaping
- Matched to high VG e-liquid, around 70VG/30PG
At a glance
- Replaceable pods
- Yes
- Brand
- Hellvape
- Model
- P-Series
- Resistance
- P7-01: 0.15ohm; P7-02: 0.2ohm
- Coil type
- Kanthal (KA1) meshed coil
- Wattage
- P7-01: 60-70W; P7-02: 50-60W
- Compatible with
- Hellvape Fat Rabbit 2 tank and Hellvape Hellbeast 2 tank
- Fitting
- Push-in (plug-in) coil replacement
- Recommended e-liquid
- High VG, about 70VG/30PG
- Resistance options
- P7-01 0.15ohm Coil, P7-02 0.2ohm Ka1 Meshed Coil
Description
Hellvape P-Series Replacement Coils
These are the replacement coils for the Hellvape Fat Rabbit 2 and Hellbeast 2 sub ohm tanks. They come in two versions, the P7-01 and the P7-02, and both are Kanthal (KA1) mesh coils built for direct lung vaping.
If your current coil has run its course, this is the part you need. There is no wrapping, no cotton and no tools involved: the coil pushes straight into the tank. This is a replacement part only, so there is no battery, e-liquid or nicotine in the pack.
Which kits it fits
The P-Series coils are made for these Hellvape tanks:
- Hellvape Fat Rabbit 2 tank
- Hellvape Hellbeast 2 tank
We have not confirmed them for any other tank or kit, so please check yours is one of the two above before you order.
Choosing your resistance
Resistance decides how the draw feels. A higher resistance gives a tighter, cooler draw. A lower resistance gives a warmer, airier draw with more vapour. Both coils here sit in sub ohm territory and are made for high VG e-liquid, around 70VG/30PG.
- P7-01, 0.15ohm: the lower of the two, run at 60-70W. Pick this one for a warmer, airier draw.
- P7-02, 0.2ohm: run at 50-60W. It suits you if you like a slightly cooler, more reined-in draw at lower power.
Stick to the wattage range for the coil you choose and keep the tank topped up with a high VG liquid.
Specification
| Specification | Detail |
|---|---|
| Brand | Hellvape |
| Model | P-Series |
| Resistance | P7-01: 0.15ohm; P7-02: 0.2ohm |
| Coil type | Kanthal (KA1) meshed coil |
| Wattage | P7-01: 60-70W; P7-02: 50-60W |
| Compatible with | Hellvape Fat Rabbit 2 tank and Hellvape Hellbeast 2 tank |
| Fitting | Push-in (plug-in) coil replacement |
| Recommended e-liquid | High VG, about 70VG/30PG |
| Resistance options | P7-01 0.15ohm Coil, P7-02 0.2ohm Ka1 Meshed Coil |
Delivery & returns
-
Free Next-Day Delivery
On orders over £35
-
7-day dispatch
Same-day processing before 4pm, every day
-
Discreet tracked delivery
Plain packaging, full tracking
-
Expert support team
No chatbots. Speak to an expert.
Hellvape P-Series Replacement Coils FAQs
Which tanks do Hellvape P-Series coils fit?
They fit the Hellvape Fat Rabbit 2 tank and the Hellvape Hellbeast 2 tank. We have not confirmed them for any other tank, so please check yours is one of these two before ordering.
What is the difference between the P7-01 and P7-02?
The P7-01 is 0.15ohm and runs at 60-70W, giving a warmer, airier draw. The P7-02 is 0.2ohm and runs at 50-60W, so it is the slightly cooler, lower-power option. Both are Kanthal mesh coils.
Do I need any tools to change the coil?
No. These are push-in (plug-in) coils, so you simply press the new one into the tank. There is no coil wrapping, no cotton to fit and no tools needed.
What e-liquid should I use with P-Series coils?
Use a high VG e-liquid, around 70VG/30PG. These coils are made for direct lung vaping, and a thicker high VG liquid suits their low resistance and the airy draw they produce.
You might also like
18+ For adults only. This product contains nicotine which is a highly addictive substance. We check age at checkout.